On November 12, 2026, Safe Work Australia (SWA) announced the update of 15 model Codes of Practice to support the transition from workplace exposure standards (WES) to workplace exposure limits (WEL). The update mainly involves terminology adjustments and adds links to new air monitoring guidance; the exposure limit values themselves are subject to the WEL list.
WEL Replaces WES: Transition Timeline and Key Changes
Australia is transitioning to the WEL list. From December 1, 2026, employers must ensure that no person at their workplace is exposed to an airborne contaminant at a level above the exposure limit specified in the WEL list; until the WEL list takes effect, employers must continue to comply with the current WES list.
According to ChemRadar's records, the new WEL list was released on November 17, 2025 and will replace the Workplace Exposure Standards for Airborne Contaminants (2025 Edition) from December 1, 2026. Compared with the WES framework, the main changes under the WEL include:
- Renaming: the term "exposure standard" is renamed "exposure limit";
- Types of limits: three types, namely the eight-hour time-weighted average limit (TWA), the short-term exposure limit (STEL), and the peak limitation;
- Revised limits: existing limits have been comprehensively reviewed and revised, with the limits of 160 substances lowered, 11 raised, and 79 revised;
- New addition: an exposure limit for diesel particulate matter (0.01 mg/m³) has been added;
- Removal: the exposure limits for 33 non-threshold genotoxic carcinogens have been removed, and exposure to such substances should be avoided as far as possible.
The WEL applies to all persons conducting a business or undertaking (PCBU) in Australia, i.e., employers and operators.
List of the 15 Updated Model Codes of Practice
The updated model Codes of Practice cover hazardous chemicals risk management, SDS preparation and labelling, asbestos management, dust and noise protection, and other areas. The details are as follows:
- Abrasive blasting
- Confined spaces
- Demolition work
- Excavation work
- Healthcare and social assistance industry
- How to manage and control asbestos in the workplace
- How to manage work health and safety risks
- How to safely remove asbestos
- Labelling of workplace hazardous chemicals
- Managing noise and preventing hearing loss at work
- Managing risks of hazardous chemicals in the workplace
- Managing risks of respirable crystalline silica in the workplace
- Preparation of safety data sheets for hazardous chemicals
- Spray painting and powder coating
- Welding processes
The updated model Codes of Practice have been published on the SWA website. SWA also noted that businesses can visit its airborne contaminants hub for resources and guidance to help understand their work health and safety (WHS) duties and prepare for the implementation of the WEL on December 1, 2026.
ChemRadar Insights
The countdown to the implementation of the WEL has begun. Businesses involved in exporting chemicals to Australia may focus on the following:
- Benchmarking against the limits: check the exposure limits cited in the safety data sheets (SDS) of exported products against the WEL list (especially the exposure controls/personal protection information in Section 8), and replace them with WEL values promptly to avoid continuing to cite the superseded WES data;
- Document updates: where hazardous chemicals risk management documents, label preparation, and air monitoring arrangements are involved, update related terms such as "exposure standard" and "exposure limit" in line with the updated model Codes of Practice;
- Duty holders in Australia: businesses conducting a business or undertaking (PCBU) in Australia must ensure that, after December 1, workplace exposure to airborne contaminants does not exceed the WEL; it is recommended to complete risk assessments and monitoring plans in advance;
- Follow-up developments: the workplace exposure limit for benzene will be further lowered on June 1, 2027, and relevant businesses may arrange product compliance assessments in advance.
To freely query occupational exposure limits for Australia and more than 40 other countries/regions, please visit the "Occupational Exposure Limits (OEL) Database" on ChemRadar (https://www.chemradar.com/en/tools/oel; official Australian model Codes of Practice and WEL guidance are available on SWA's airborne contaminants hub (https://www.safeworkaustralia.gov.au/safety-topic/managing-health-and-safety/airborne-contaminants).
